Toll Debinding & Sintering

Elnik Systems retort

If you are:

DSH can help!

DSH is happy to do your toll processing of the 1st stage and thermal debind/sinter up to the pre-production run. DSH can remove the primary binder in your parts if they are soluble in a solvent or water.

We have an Elnik Systems CD3045 oven for the catalytic debinding of BASF feedstock. 

We also have two Elnik Systems MIM 3045 furnaces that are available for toll sintering of your parts. These Elnik MIM 3045 debinding and sintering furnaces have many unique features, including Elnik’s computer interface and PLC control of optimum temperature uniformity and atmosphere.

These furnaces provide 3,840 square inches of load space (2.48 sq. m). Spacing between trays is 1.5” (38mm) in one furnace and 2” (50mm) in the other. Multiple zones of temperature control and atmosphere flexibility combine to make these furnaces perfectly suited to create high dimensional precision parts made in any commercial binder system on the market today. 

Atmospheres available in these furnaces include partial pressure nitrogen, argon, hydrogen, and mixed gases as well as high vacuum. The furnaces are capable of 1650°C under vacuum or 1610°C in up to one atmosphere of hydrogen, nitrogen, argon, or mixed gases. Both furnaces are also fully equipped for product development, feedstock work, process time improvement and any other debinding or sintering development.